How to set fixed IP addresses

Here we will explain how to set fixed IP addresses for tablet PCs if necessary.
We recommend using a hardware keyboard for inputting IP addresses. Please use one if you have one.

 

Procedure

If the scanner app is open, please close it.
From the upper right of the main screen, click on the "Power" button. The closing options will be displayed, so please press "Close App".

 

Windows11

1. Close the scanner app if it's open. From the upper right of the main screen, click on the power button. The closing options will be displayed. Choose "Close App".

 

2. Click the Windows icon in the taskbar and click "Settings" from the gear icon.

 

3. Select "Network & Internet" on the left and "Ethernet" for wired connections.

 

For wireless connections select "Properties" at the top.

 

4. Tap "Edit".

 

5. Tap "Automatic (DHCP)" to open the pulldown and select "Manual".

 

6. Turn on the “IPv4" switch, enter the IP address, etc., and then “Save". This completes the setup.

 

 

Windows10

1. Close the scanner app if it's open. From the upper right of the main screen, click on the power button. The closing options will be displayed. Choose "Close App".

 

2. Open [Settings].

 

3. Click on [Network & Internet].

4. Click on [Change adapter options].

5. For wired connections select [Internet], for wireless connections select [Wi-fi], and then click on [Change setting of this connection].
*If the internet icon does not come up, please disconnect the PC from the docking station and then reconnect.

6. Select "Internet protocol version 4 (TCP/IP v4)", then click on "Properties".

7. Set each field, and then click the "OK" button. The settings are now complete.

8. To open the scanner app, double click on the scanner app icon.

 

Windows8.1

1. From the right end of the screen, swipe in the menu, and click on "Settings"

 

2. Click on "Control panel"

3. Click on "Network and Internet"

 

4. Click on "Change adapter settings"

 

5. For wired connections select "Internet", for wireless connections select "Wi-fi", and then click on "Change setting of this connection".
Select "Internet protocol version 4 (TCP/IP v4)", then click on "Properties".
*If the internet icon does not come up, please disconnect the PC from the docking station and then reconnect.

6. Set each field, and then click the "OK" button. The settings are now complete.
To open the scanner app, double click on the scanner app icon.

 

这篇文章有帮助吗?
22 人中有 9 人觉得有帮助